Need help?Do you have a question about the HQ Power VDPL300D and is the answer not in the manual?
Covers critical warnings for installation, operation, and handling to prevent electrocution, damage, and injury.
Details requirements for proper earthing, voltage checks, and mains connection for protection class I devices.
Outlines warranty limitations for damage from disregard of manual guidelines or user modifications.
Provides guidance on application, environmental selection, mounting, and safe operational practices.
Identifies and labels key parts of the device, including DMX ports, switches, and microphone.
Instructions for secure and safe mounting, including qualified personnel, support requirements, and safety cables.
Step-by-step guide for safely replacing a blown fuse using the correct type and rating.
Details how to connect the device to a DMX controller using XLR cables for serial linking.
Recommends using a DMX terminator to prevent signal corruption in noisy environments or long cable runs.
Explains how to set the digital start address for DMX control and addressing multiple units.
Guidelines for checking screws, housing, mechanical parts, cables, and regular cleaning with a lint-free cloth.
Power| power supply | 230VAC/50Hz |
|---|---|
| power consumption | 24W |
| fuse | F2A, 250VAC |
Connectivity| dmx connection | 3-pin XLR |
|---|
Lighting| led count | 90 |
|---|---|
| led configuration | 30 x red, 30 x green, 30 x blue |
Operating Environment| max ambient temperature | 40°C |
|---|---|
| max housing temperature | 60°C |
Weight and Dimensions| dimensions | 300 x 382 x 187mm |
|---|---|
| total weight | 1.8kg |
To Next Page
