Operation Manual
13
bracket on it, paste it on the rear of your main unit, and uncover the other side
protective film, paste it on the wall.
Notice: Make sure the output wires which have already fixed could reach the
main unit and connect it easily.
There are two female terminal below the main unit, insert the output cable into
the main unit, and connect the the power supply with the female terminal above
the main unit.
Step 4 Connect to the power supply
Plug the power adapter to the socket of your power supply. There should be
three green indicator lights on the main unit. The one of the above represent the
power’s incoming. Two lights of the below represent the output’s working
condition.
Section 3 Observation Timetable
HQUA 5000E works differently from the traditional water softener, and the water
hardness will not show any change. Some phenomenon will happened in the water
system help to judge the working condition.
Day 3:
After 3-days running, you could find out that the soap lathers more easily. The
To Next Page
Loading...
