To Next PageTo Next PageWhat to do if GFCI circuit tripped in HQUA HQUA-FS02?
If the GFCI circuit tripped when using your HQUA Outdoor Fountain, it might be due to damage to the electrical cord or low voltage from the power supply. It's recommended to contact a qualified electrician for professional assistance.
How to troubleshoot power issues with HQUA HQUA-FS02 Outdoor Fountain pump?
If your HQUA Outdoor Fountain's pump isn't receiving power, begin by checking the power outlet and the electrical cord to ensure they are functioning correctly.
What to do if the water line is too high in HQUA Outdoor Fountain?
If the water line in your HQUA Outdoor Fountain is too high, check the fountain float for any water accumulation. If water is present, replace the float.
How to clean a clogged nozzle in HQUA Outdoor Fountain?
If debris is caught in the nozzle hole of your HQUA Outdoor Fountain, or if the nozzle is defective, remove the nozzle, clean it thoroughly, and then replace it.
What to do if HQUA HQUA-FS02 intake is plugged?
If the intake of your HQUA Outdoor Fountain is plugged or the fountain impeller is stuck, clean the intake. If the issue persists, contact HQUA.
Why there is not enough water in HQUA HQUA-FS02 Outdoor Fountain pond?
If the water level in your HQUA Outdoor Fountain pond is insufficient, ensure that the water depth isn't lower than 40 inches. Stop using the unit until you achieve the necessary water depth.
General| Brand | HQUA |
|---|---|
| Model | HQUA-FS02 |
| Category | Outdoor Fountain |
| Language | English |
Guidelines and precautions for preventing electric shock when using the fountain.
Essential safety rules for operation, including water levels, lifting, and proper grounding.
Details and diagrams of the fountain's main parts and accessories.
Technical details of the fountain, including power, voltage, and pond size suitability.
Tools required and preliminary steps before installing the fountain.
Step-by-step instructions and visual aids for assembling and installing the fountain.
Procedures for regular cleaning and upkeep to ensure pump longevity.
Steps for removing and storing the fountain safely during winter months.
Inspection points for the fountain and power cord before spring setup.
Diagnosing and resolving issues when the fountain pump does not operate.
Troubleshooting tips for low spray volume or inconsistent water patterns.
Identifying causes and solutions for the pump starting and stopping frequently.
Addressing problems related to fluctuating spray height or water line issues.
Information on how to contact the technical support team for assistance.
Details of the limited warranty coverage for the fountain and its components.
