Dear Customer,
Thank you for choosing HRESYS Lithium Battery Systems!
Unboxing & Initial inspection
⚫ Please read this manual before installation.
⚫ Please inspect the package before unboxing, if any destroy with appearance, contact
with the supplier as soon as possible.
⚫ This device shall be installed and operated by professionals.
Preparation for Installation
⚫ Batteries shall not be placed in direct sunshine or close to heat source.
⚫ Batteries shall be installed in place with good ventilation to assure sufficient enough
heat dissipation.
⚫ Batteries shall be placed in area with clean air ambient and low humidity.
⚫ Heavy weight shall not be placed on any cable.
⚫ Required Appropriate tools and materials must be used are available. Use
insulated only tools with insulated handles.
⚫ The following figure illustration below is for reference only.
To Next Page
Loading...
Need help?
General
