Page 3 of 8
The Hire Supply Company (UK) Limited
Product Key Component Identification –
Thank you for purchasing the Elite BCE45LV2 & BCE60LV2 manufactured to the highest standards drawing upon over
20 years’ experience supplying the UK hire and construction industry, this product will, if used in accordance with
these operating instructions, labels affixed to the product and properly maintained, provide you with many years of
reliable service.
The Elite evaporative air coolers use the “evaporation reduces air temperature “, principle. It uses the water saturated
cooling pad located on the sides and back of the unit to add moisture to the air therefore reducing the air
temperature and increasing the humidity to provide the user with a more comfortable environment and cooling
effect.
Water is sprayed onto the filtered cooling pads by continuously pumping and recycling the system water, this water
then evaporates as the hot air is passed through these saturated filtered cooling pads. This filtered, oxygen enriched
water-cooled air is blown out into the area creating a cooler workplace.
Evaporative air coolers are energy efficient saving both running costs and the planet compared to other air-cooling
products.
To Next Page