HSDJets MFC-2085 - Advanced System Settings; Throttle, Flap & Landing Gear Control

Set Door 2 Reverse
ON
OFF
Gear Door
1.Reverse
2.Travel angle
Elec.Landing Gear
4.Door 2
5.Door 3
6.Door speed
Set Door 1 Travel
90(degree)
Gear Door
1.Reverse
2.Travel angle
Set Door 1 Reverse
ON
OFF
Gear Door
1.Reverse
2.Travel angle
Elec.Landing Gear
1.Work Mode
2.Delay
3.Door 1
Set Gear Delay
3.0(sec)
Elec.Landing Gear
1.Work Mode
2.Delay
3.Door 1
Elec.Landing Gear
1.Work Mode
2.Delay
3.Door 1
System Setting
7.Throttle CP
8.Flap CP
9.Elec.Landing Gear
Set AUX5-2 Sub-trim
+0 %
AUX5-2 Setting
4.Sub-trim
Set Elec.Gear Mode
OFF
M1
M2
M3
M4
Set AUX2 CP
+0 %
Throttle CP
1.State
2.Start Point
3.AUX2 CP
Set Start Point
+10 %
Throttle CP
1.State
2.Start Point
3.AUX2 CP
Set Throttle CP State
ON
OFF
Throttle CP
1.State
2.Start Point
3.AUX2 CP
System Setting
7.Throttle CP
8.Flap CP
9.Elec.Landing Gear
Specialnote:
Whenthisfeatureis
turnedon:
*Thethrottleisneeded
todefineasAUX6
*Theelevatorisneeded
defineasAUX2
Set AUX2 CP
+0 %
Set CP Speed
1
Flap CP
1.State
2.AUX2 CP
3.CP Speed
Flap CP
1.State
2.AUX2 CP
3.CP Speed
Set Flap CP State
ON
OFF
Flap CP
1.State
2.AUX2 CP
3.CP Speed
System Setting
7.Throttle CP
8.Flap CP
9.Elec.Landing Gear
Specialnote:
Whenthisfeatureis
turnedon:
*Theflapisneededto
defineasAUX4