HSM 386.2 - Technical Data

HSM 386.2 Paper shredder
9. Technical Data
Cutting type Strip cut Cross cut
Shred size (mm) 5.8 3.9 3.9 x 30 1.9 x 15
Sa fe ty ra ting DIN 32757 – 1 2 2 3 4
Cutting ca pa ci ty (sheets), DIN A4 70 g/m
2
80 g/m
2
28 - 30
22 - 24
23 - 25
18 - 20
16 - 18
12 - 14
12 - 14
9 - 11
Cutting speed 120 mm/s 135 mm/s 130 mm/s
Weight 33 kg 35 kg
Noise level (Idle running/ load) 60 dB(A) / 64 dB(A) 62 dB(A) / 64 - 70 dB(A)
Lo ading width 386 mm
Voltage 230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
Power
for the maximum number of sheets 670 W
Dimensions W x D x H (mm) 545 x 410 x 840
Volume of shredded material bag 116 l
Technical and optical modifications reserved.
Declaration of Conformity
Machinery directive 98 / 37 / EG
EMC directive 89 / 336 / EWG
Low voltage directive 73 / 23 / EWG
The manufacturer HSM Pressen GmbH + Co. KG, Bahnhofstraße 115, D-88682 Salem declares herewith, that the paper
shredders HSM 386.2 aboved mentioned correspond with the EC Machine Directive including all relevant modifications.
Applied standards and technical specifications:
• EN 55014-1:2000 + A1:2001 + A2:2002
• EN 55014-2:1997 + A1:2001
• EN 61000-3-2:2000
• EN 61000-3-3:1995 + A1:2001
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 294:1992
Salem, 01.04.2005
Rolf Gasteier - Technical Director
• EN 61000-4-4:1995 + A1:2001 + A2:2001
• EN 61000-4-5:1995 + A1:2001
• EN 61000-4-6:1996 + A1:2001
• EN 61000-4-11:1994 + A1:2001
• EN 60950-1:2001
Machine type inspection for compliance with the requirements of the EC Machine Directive was carried out by the „Admi-
nistration“/Inspection Authority Committee of Experts, Subject Area „Office Machines and Devices“, on the premises of the
Verwaltungs-Berufsgenossenschaft, Deelbögenkamp 4, D-22297 Hamburg. This inspection authority is the authority respon-
sible in accordance with Annex V of the EC Machine Directive.
10
english 0510
http://www.monomachines.com
http://www.monomachines.com