To Next PageTo Next PageHow to fix a paper jam in my HSM Paper Shredder?
If your HSM Paper Shredder has a paper jam, try the following: * Set the slider switch to "REV". * Set the slider switch to "ON/AUTO" again. * Ensure you are not feeding too many sheets at once.
What to do if the shredded material container is full in my HSM shredstar S10?
If you're experiencing issues related to the shredded material container with your HSM Paper Shredder, consider these points: * Check the level in the shredded material container and empty it in good time. * If the motor was overloaded, let the shredder cool down for 15 to 20 minutes before using it again.
General| Dimensions (WxDxH) | 340 x 210 x 410 mm |
|---|---|
| Power requirements | 230 - 240 V/ 50Hz |
| Noise level | 67 dB |
| Basket volume | 15.7 L |
| Product color | Black, Silver |
| Working width | 216 mm |
| Shredding size | 6.3 mm |
| Shredding type | Strip shredding |
| Paper shredding | Yes |
| Shredding paper clips | - |
| Credit cards shredding | No |
| Security level (paper) | 1 |
Weight and Dimensions| Weight | 3200 g |
|---|
Explains WARNING, NOTICE, and Note symbols for safety hazards.
Read manual, keep for reference, and observe machine safety instructions.
Details risks from blades, entanglement, combustion, children, and electrical shock.
Shredder for paper, CDs/DVDs, credit cards; avoid unsuitable materials like clips or foils.
2-year warranty; excludes normal wear, improper handling, and third-party actions.
Lists and describes the main parts of the shredder from 1 to 7.
Explains the Power, Overload, and Overheat LED indicators.
Describes the function of the Operation and Reverse buttons.
High voltage warning, dry indoor use only, ensure ventilation and plug access.
Verify power supply, install CD container, and connect the power plug.
Steps to switch on, notes on cutting unit use, and paper shredding.
Safety for CDs/DVDs, procedure for shredding CDs/DVDs and credit cards.
Steps to turn off the shredder, including checking indicators.
Explains the Power, Overload, and Overheat indicators.
Solutions for overload, overheat, bin full, and sensor problems.
High voltage warning, switch off before cleaning, use a soft cloth.
When to lubricate and how to apply oil to the cutting unit.
Proper disposal of electronic waste and packaging materials.
Lists included items and available accessories like cutting oil.
Details on type, cutting type, size, and security level for S10, X5, X8.
Capacity, speed, power, weight, dimensions, and noise levels.
Operating mode, times, ambient conditions, and compliance with standards.
