To Next PageTo Next Page
Need help?Do you have a question about the HSM shredstar X12pro and is the answer not in the manual?
General| Security Level | P-4 |
|---|---|
| Sheet Capacity | 12 sheets |
| Bin Capacity | 23 liters |
| Dimensions | 37 x 30 x 62 cm |
| Weight | 9.5 kg |
| Noise Level | 58 dB |
| Security Level (DIN 66399) | P-4 |
| Bin Volume | 23 liters |
| Automatic Start/Stop | Yes |
| Overload Protection | Yes |
| Cut Type | Cross Cut |
| Shred Speed | 2 m/min |
| Material Shreds | Paper, credit cards |
| Speed | 2 m/min |
General safety advice before operating the machine.
Warning about inserting hands into the paper feed slot.
Keep loose items away from the feed opening to prevent entanglement.
Avoid flammable cleaning agents or pressurized air sprays.
Machine usage requires supervision for children and those with limited capabilities.
Improper handling can lead to electric shock; check cable and disconnect.
Shredding paper and small quantities of CDs/DVDs and credit cards.
Do not shred large paperclips, padded envelopes, cardboard, plastic, etc.
The warranty is 2 years, excluding wear and improper handling.
Lists numbered components like container, feed openings, switches.
Explains indicator lights and buttons like Power, Operation, Reverse.
Use in dry rooms, keep away from heat, ensure ventilation.
Check voltage, plug into a properly installed socket.
Insert the provided CD container into the shredded material container.
Set mains switch and press operation button.
Feed paper into the center, light barrier activates cutting.
Remove staples/paperclips to increase durability.
Feed one CD/DVD, empty CD container after 5 CDs.
Insert card in feed opening, dispose of material separately.
Press operation button and set mains switch to "0".
Shows appliance is ready for use.
Motor has overheated; allow 30 mins to cool.
Machine overloaded; cutting unit reverses or paper needs reducing.
Container is full; cutting unit switches off.
Shredded material container is not correctly inserted.
Lights indicate door open or container missing.
Caused by blocked light barrier or paper dust; requires clearing.
Switch off, disconnect mains plug before cleaning.
Oil the cutting unit when performance drops or noise increases.
Use a soft cloth and mild soap-water solution, avoid water ingress.
Paper shredder, operating instructions, oil.
Special cutting block oil 250 ml.
Details types, cut sizes, security levels for X12pro, X13, X15.
Cutting speed, capacity, power consumption, weight.
Operating temperature, humidity, and dimensions.
CE and UKCA compliance, EU directives.
