1. OVERVIEW
1.1 EPS series circulating pump is mainly used for the water circulation in homeheating and
domestic hot water system.
EPS series circulating pump is most suitable for the following system:
1. Stable heating system with variable flow
2. Heating system with variable pipeline temperature
3. Solar system
4. Industrial circulation system
5.
Home heating and domestic water supply system
EPS series circulating pump is equipped with a permanent magnet motor and
differential pressure controller which can adjust the performance of electric pump
automatically and continuously to meet the actual needs of the system.
EPS series circulating pump is equipped with control panel on the front, which is
convenient for the operation of users.
1.2 Advantages of installation of EPS series circulating pump
1. Easy installation and start-up
2. EPS series circulating pump has Autoadaptation mode AUTO (factory settings).
In most cases, you can start the pump without need to make any adjustments and
automatically adjust it to meet the actual needs of the system.
3. High comfort
4. The running noise of pump and the whole system is low.
5. Low energy consumption
6. Compared with the conventional circulating pump, its energy consumption is very low.
7. The minimum energy consumption of EPS series circulating pump can reach 5W.
To Next Page
