HT Wainlux K6 User Manual

Page 1 of 5
Wainlux K6
Quick Start Guide
Before You Begin
• Ensure that all parts are included in the box.
Software Setup
• Open your app store and download the "Engraver" app specific to your smartphone's platform.
• Turn on Bluetooth on your Smartphone.
• In the top right corner of the app, it may say "not connected." Press on it and select your engraver
from the list of available devices.

HT Wainlux K6 Specifications

General

Brand	HT
Model	Wainlux K6
Category	Engraver
Language	English

Summary

Initial Setup and Preparation

Product Accessories and Dimensions

Details the included accessories and the machine's physical dimensions for the Wainlux K6.

App Installation and Bluetooth Pairing

Guides on downloading the 'Engraver' app and connecting the device via Bluetooth for operation.

Operating the Engraver via App

Text Input and Design Selection

Instructions for selecting the text tool and choosing a design scene within the 'Engraver' app.

Carving Parameter Configuration

Guides on adjusting text fill, size, material, laser power, speed, and repetitions.

Safety and Engraving Process

Essential Safety Guidelines

Emphasizes following user manual instructions and wearing safety glasses to protect eyes from laser light.

Initiating the Engraving Job

Steps for using the 'Regional Targeting' feature and starting the engraving process from the app.

Post-Engraving Recommendations

Experimentation and Best Practices

Encourages experimenting with scrap material and creating reference settings for future use.