Streaming music to speakers powered by the Qualcomm AllPlay smart media
platform
Before you start, make sure your speakers are connected to your Wi-Fi network. Refer to the
documentation that comes with your speakers to set up and connect them to your Wi-Fi network.
1. After connecting your speakers to your Wi-Fi network, open a music app on your phone.
2. Swipe up with three fingers on the screen.
Your phone then turns Wi-Fi on automatically and scans for media devices on your Wi-Fi
network. You'll then see the available speakers listed.
3. Tap the speaker you want to connect to.
4. In the music app that you're using, start playing music. You'll then hear the music play from
the speaker you've selected.
5. To switch between speakers or to group them, swipe up the screen again with three fingers.
§ Just tap another speaker to stream music to it.
§ To group speakers so that music plays through them at the same time, tap the Group
button next to a speaker name, select the other speakers you want to group it with, and
then tap OK.
Turning Bluetooth on or off
1. From the Home screen, tap
, and then find and tap Settings.
2. Tap the Bluetooth On/Off switch to turn the Bluetooth connection on and off.
3. Tap Bluetooth to see a list of available devices.
Turn off Bluetooth when not in use to save battery power, or in places where using a wireless
device is prohibited, such as on board an aircraft and in hospitals.
Connecting a Bluetooth headset
You can listen to music over a Bluetooth A2DP stereo headset, or have hands-free conversations
using a compatible Bluetooth headset.
Before you connect your headset, make it discoverable so HTC Desire 10 pro can find it. Refer to
your headset manual for details.
1. Turn Bluetooth on and check the list of available devices.
See Turning Bluetooth on or off on page 144.
2. If you don't see your headset listed, tap Scan for devices to refresh the list.
144 Wireless sharing
To Next Page
Loading...
