HTC Desire 10 pro - Unpairing from a Bluetooth Device; Receiving Files Using Bluetooth

3. Tap the name of your headset in the Available Devices section. HTC Desire 10 pro pairs with
the headset and the headset connection status is displayed in the Paired Devices section.
4. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
When the Bluetooth headset is connected, you'll see in the status bar.
Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC Desire 10 pro,
and then turning on the headset.
However, you might have to connect manually if your headset has been used with another Bluetooth
device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 144.
2. Tap the headset’s name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
If you still cannot reconnect to the headset, follow the instructions in Unpairing from a Bluetooth
device on page 145, and then follow the steps under Connecting a Bluetooth headset on page 144.
Unpairing from a Bluetooth device
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 144.
2. In the Paired devices section, tap
next to the device to unpair.
3. Tap Unpair.
Receiving files using Bluetooth
HTC Desire 10 pro lets you receive various files with Bluetooth including photos, contact info, and
documents such as PDFs.
Refer to the device’s documentation for instructions on sending information over Bluetooth.
1.
Turn Bluetooth on.
See Turning Bluetooth on or off on page 144.
2. On the sending device, send one or more files to HTC Desire 10 pro.
145 Wireless sharing