HTC Desire 820 - Page 141

141 Internet connections
Turning Wi-Fi on
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. Tap the Wi-Fi tile to turn Wi-Fi on.
3. Tap
to see a list of detected wireless networks.
 To manually scan for Wi-Fi networks, tap > Scan.
 If the wireless network that you want is not listed, tap
> Add network to
manually add it.
Connecting to a Wi-Fi network
1. Turn Wi-Fi on, and check the list of detected Wi-Fi networks.
See Turning Wi-Fi on.
2. Tap a Wi-Fi network you want to connect to.
3. If you selected a secured network, enter the network key or password.
4. Tap Connect. You'll see the Wi-Fi icon
in the status bar when connected.
Preventing notifications from unsecured Wi-Fi networks
You can prevent getting notified about unsecured Wi-Fi networks.
1. Turn Wi-Fi on, and check the list of detected Wi-Fi networks.
See Turning Wi-Fi on.
2. Press and hold an unsecured Wi-Fi network you want to stop being notified
about, and tap Block network notification.
3. To unblock an unsecured Wi-Fi network, press and hold the network name and
tap Unblock network notification.
Connecting to a Wi-Fi network via WPS
If you're using a Wi-Fi router with Wi-Fi Protected Setup (WPS), you can connect HTC
Desire 820 easily.
1. Turn Wi-Fi on, and check the list of detected Wi-Fi networks.
See Turning Wi-Fi on.
2. Tap
> WPS Push, and then press the WPS button on your Wi-Fi router.
To use the Wi-Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.
Logging into a public Wi-Fi network automatically (WISPr)
You can set HTC Desire 820 to automatically log into a public Wi-Fi network that you
regularly use.
This saves you the trouble of going through the Wi-Fi provider's web authentication
every time you connect to their Wi-Fi network. Just add your login credentials to the