HTC Confidential
HTC confidential
© 2001, HTC Corporation. All rights reserved. TOTAL 36 CONT.ON. 22 PAGE NO. 21
5.4 Test Items Operation
How to select test item: Using navigation button -"Up" or "Down" to select the test items
How to execute the test program: Press “Action” to start each of test item.
No.
Item Description Remark
1
Run-in Test
Runs all test items listed here. To stop the program when end
of every cycle. A cycle is around 65 secs.
2
Auto Test
Runs all test items listed here for 1 loop.
3
Button Test
Press each button to know if it works. Follow up the instruction
shown on the screen to finish the test item Stop on fail.
4
Touch Test
Tap the cross mark (+) with stylus on the correct location. Fail if
no reaction. If get fail suggest to test again under WinCE for
double check.
5
Audio Test
Record and Playback Test, must test with the ear plug
6
Display Test
Unit prompts for different display page to detect the defect of
LCD, lines or dots. Press eft/up/right/down to carry on/choose
the different mode.
7
BLight & LED Test
Follow up the instruction shown on the screen to finish the test
item
8
Upload to SD
Upload bootloader or Rom image to SD card
9
SDRAM SD card Write/Read/Write Protect test.
10
SD Card Test
Insert SD card (Enable Write Protect) and start test. Pull out the
SD card if you see the message “ Plugged OK Protected”.
Adjust lock switch to unlock site (Disable Write Protect, and
insert it. Return to test menu if pass.
11
SIR Test
Prepare another unit as ‘supporting’ site. On test unit, please
choose ‘Test Target’ and press action button to start test.
Before test, make the IR ports of them face to each other. If get
fail suggest to test again under WinCE for double check.
12
Checksum
Verifies the checksum of the code.
13
USB Test
Plug USB cable to connect PDA to PC then and check if USB
OK or not.
14
Asset viewer Asset data check for SN and country ID
To Next Page
Loading...
