2
1. With the phone facing
down, insert the tip of the
tray eject tool that came
with your phone (or a
small bent paperclip) into
the hole next to the nano
SIM card tray that’s on the
left side of the phone.
Push the tip all the way
into the hole until the tray
ejects, and then pull the
tray out.
2. Place your nano SIM card
into the tray, with the gold
contacts facing up and
cut-off corner facing out.
When reinserting the
nano SIM tray, make sure
it is facing up so that the
nano SIM card doesn’t fall
out. Slide the tray all the
way into the slot.
3. Flip the phone over
and use the same tray
eject tool to eject the
microSD™ card tray that’s
on the right side of the
phone. Pull the tray out.
IMPORTANT: Use a standard nano SIM only.
Don’t cut a micro SIM or regular SIM card and insert
it into the nano SIM slot. It’s thicker than the standard
nano SIM card and may get stuck in the slot.
___ Insert your nano SIM and
microSD cards
gold contacts
cut-o corner
nanoSIM
To Next Page
Loading...
