4. After downloading, connect your iPhone to the Wi-Fi network of
your RE.
5. Press the Home button, and then tap the RE app icon .
You'll see an in-app notification below the Settings button.
6. Tap the Install RE update notification.
7. Tap Install, then wait until the firmware update is complete.
Your RE camera will restart after updating the firmware. This temporarily
disconnects your iPhone and RE. See Connecting your RE and phone on
page 22 to know how to connect your devices again.
On your Android phone
1. Connect your phone and your RE.
2. Go to Settings.
3. Tap Advanced settings.
4. Tap Check for updates.
5. If there's an available firmware update, tap Update.
6. Wait until the firmware update is complete.
Set up 25
To Next Page
Loading...
