HTC VIVE Focus Plus - Headset Setup and Basic Operations; Attach Face Cushion

English
10
Inside the headset
You will need to do the following to fully complete the setup of your VIVE Focus Plus:
A. Pair the controllers with the headset
Press and hold the VIVE button on both controllers for a few seconds to turn them on and start the pairing
process. The pairing is successful when the controllers vibrate for a few seconds. After pairing, follow the
onscreen instructions to finish setting up VIVE Focus Plus.
Pick up the controllers
Hold each controller the same way as the
illustration with your index finger on the Trigger
and middle finger on the Grip button. Always
wear the wrist strap when using the controllers.
In VR, select buttons and objects by using the
controller with the beam or by touching them
with the controller.