English
9
Wear the headset
• Loosen the velcro straps on top.
• Loosen the back head support
using the Adjustment dial. Do
not loosen the support by just
pulling it.
Note: If you have long hair or a
ponytail, loosen the back head
support all the way.
• Tighten the Velcro straps
and Adjustment dial until you
find your preferred fit. Do
not push to tighten the back
head support.
• The fit should be snug.
• With the headset on, pull down
the back head support and
position it at the base of your
skull.
Note: If you have long hair, position
the back head support above the
base of your skull (see illustration).
To Next Page
Loading...
