English
9
Wear the headset
• Make sure to loosen the velcro
straps on top.
• Make sure to loosen the
back head support using the
Adjustment dial. Do not loosen
the support by just pulling it.
Note: If you have long hair or a
ponytail, loosen the back head
support all the way.
• Wear the headset and then pull
down the back head support
and position it at the base of
your skull.
Note: If you have long hair, position
the back head support above the
base of your skull (see illustration).
• Tighten the velcro straps
on top and the back head
support. Use the adjustment
dial when tightening the back
head support. Do not push it
in.
• The fit should be snugged.
To Next Page
Loading...
