3. Under Base Station 2.0, click Configure Base Station Channels. SteamVR will scan for
base stations in the play area. Once complete, you'll see a list of base stations. If you have
base stations that have not been detected, click Scan For More.
4. To change its channel, click on a base station link. Select an unused channel, and then
click Apply.
You can also click
Automatic Configuration to let SteamVR set the channels.
If you're prompted that there is a channel conflict, click
Continue to resolve the error.
5. When you're finished making the changes, click Done.
50 Base stations
To Next Page
Loading...
