Setting up VIVE Pro 2 for the first time
Before using VIVE Pro 2, you’ll need to complete the setup process, which includes installing
VIVE
™
and SteamVR software, setting up the hardware, and defining your play area.
Make sure to use VIVE Link Box (2.0) and VIVE Headset Cable (2.0) included with VIVE Pro 2.
1. Download the setup file on your computer from www.vive.com/setup. Run the setup file.
2. Follow the walkthrough to install the software and set up your hardware.
When you see the hardware setup screen, follow the onscreen instructions to set up your
base stations, headset, and controllers. You can also see the topics below to learn how to
set them up:
§ Depending on the type of base stations you're using, see Installing SteamVR Base
Station 2.0 on page 44 or Installing Base Station 1.0 on page 54.
§ To connect VIVE Pro 2 to your computer using the link box, see Connecting the
headset to your computer on page 27.
§ To know more about the controllers and how to turn them on, see About VIVE
Controllers (2018) on page 60 and Turning the controllers on or off on page 61.
§ To set up your play area, see Play area on page 68.
After you install everything, use the SteamVR app to check that your VR equipment—including
the base stations, headset, and controllers—is tracked.
Use SteamVR to change your play area. You might need to do this if you adjust the base stations
or move your system to a different room.
Use the VIVE Console app to change headset-related settings. To find out how to change the
display resolution, see Changing headset display settings on page 79.
6 Getting started
To Next Page
Loading...
