HTC VIVE Tracker 3.0 - Page 22

VIVE Tracker (3.0)
HTC Corporation
Developer Guidelines
V1.0
12/16/2020
19 HTC Confidential and Proprietary
Accessory:
 Datum A is set to be the top surface of the ring feature around the 1/4” Bolt.
 Datum B is set to be the intersection point between the centerline of 1/4” Screw
and Datum A.
 Datum C is set to be the intersection point between the centerline of Stabilizing Pin
and Datum A.
 The coordinate system is constructed by the Datum frame of Datum A, the line of
Datum B and Datum C, and Datum C itself.