HTC VIVE - Page 18

When should I use the Mini DisplayPort on the link box?
If your computer doesn't have a spare HDMI port or doesn't support HDMI, you can use a Mini
DisplayPort
™
cable to connect your Vive to your PC.
Mini DisplayPort cable is not provided and must be purchased separately.
Connect the Mini DisplayPort cable end to the link box, and then plug the opposite end to the
DisplayPort on your computer's graphics card.
DisplayPort
Mini DisplayPort
Restarting the link box
If you need to restart the link box, follow these steps.
1. Close all Steam apps on your computer, including the SteamVR app.
2. Unplug the power and USB cables from the PC side (without the orange trims) of the link
box.
3. Wait for a few seconds, and then plug the power and USB cables back in. On your
computer, you might see a notification that drivers are being installed. Wait for the
installation to finish.
4. To verify that VIVE hardware are detected, restart SteamVR on your computer.
18 Headset and link box