What does the status light on the base stations mean?
The status light shows:
§ Green when the base station is in normal mode
§ Blue when the base station is waiting to stabilize. If it remains in this state, check if it is
mounted securely or on a surface that's not prone to vibration.
§ Dim green when the base station is on standby
§ Purple when the base stations are trying to sync
§ Blinking purple when syncing is blocked. If you're connecting the base stations wirelessly,
you may need to use the sync cable. See Do I need to use the sync cable? on page 52.
What should I do if any of the base stations is not
detected?
Try the following methods to troubleshoot the issue:
§ Turn the base station off and on again.
§ Make sure that you've installed your base stations correctly. For details, see Installing the
base stations on page 46.
§ If the base stations have trouble wirelessly syncing with each other, there might be an
obstruction in your play area. Check if using the sync cable would solve your issue. For
details, see Do I need to use the sync cable? on page 52.
§ Restart the SteamVR app. If you still get an error, reboot your computer and reopen the
SteamVR app.
For more information, you may refer to the SteamVR Troubleshooting page.
Can I use the older version of the base stations together
with SteamVR Tracking 2.0 Base Stations?
No, they are not compatible. SteamVR Tracking 2.0 Base Stations have a different method of
syncing. Use only the same versions of the base stations in your play area so that your setup will
work correctly.
Which VIVE hardware are compatible with my base
stations?
Use only the same version of base stations together. Different base station versions are not
interchangeable.
Check the table below to see which VIVE hardware you can use with your base stations:
51 Base stations
To Next Page
Loading...
