How can I capture screenshots in VR?
While in VR, press the System button and the trigger at the same time. You'll see a notification
when the screenshot is saved.
To find the screenshot in your computer, navigate to the following path:
\Steam\userdata\[Steam user number]\760\remote\250820\screenshots
What can I do if I'm having issues with the SteamVR app?
The problem could be due to missing or corrupt files in the SteamVR app. Make sure that your
installation is intact.
1. From your computer, close the SteamVR app.
2. Open the Steam app, and then click Library Tools.
3. Right-click SteamVR, and then and select Properties.
4. Click the Local Files tab, and then select Verify integrity of tool cache.
For more information, you may refer to the SteamVR Troubleshooting page.
How do I resolve SteamVR Error 208?
If you encounter the SteamVR Error 208 (Monitor not Found) issue, check if the
troubleshooting details on What can I do to troubleshoot the headset? on page 40 can resolve
the problem.
If you're using Windows 8 or later, the issue might be caused by enhancements in power
management settings. Do these steps as a workaround:
1. On your computer, go to Control Panel System and Security System.
2. Click Device Manager, and then click to expand the list under Universal Serial Bus
controllers.
3. Right-click Generic USB Hub (there may be more than one with the same label), and then
select Properties.
4. Click the Power Management tab, and then de-select Allow the computer to turn off
this device to save power.
5. Unplug and re-plug the power cable on the link box.
6. Restart the SteamVR app.
For more information, you may refer to the SteamVR Troubleshooting page.
How can I opt-in to SteamVR Beta?
1. From your computer, open the Steam app.
2. Under Library, right-click SteamVR, and then click Properties.
3. Select the Betas tab.
71 Settings
To Next Page
Loading...
