14 | Designated use
– Do not expose the device to direct sunlight.
– Protect the transmitter from humidity and und dust.
– Admissible ambient temperature during operation: –20 °C to 55 °C
1. DESIGNATED USE
The designated use of this device is the speed control of electric DC motors with
a voltage of 12 to 24 V and maximum power consumption of 5 A. Any other
use is prohibited.
This device has been manufactured and checked according to the general safe-
ty standards. The user is obligated to follow the instruction manual and safe ty
instructions carefully.
NOTICE!
– This transmitter only works together with the H-TRONIC 8
CHANNEL RECEIVER HT200E (Art.-No 1 61 82 50). Other
receivers cannot be used. The transmitters must be trained to
function with the receiver.
– The radio system operates on the european frequency 868 MHz.
– This transmitter may only be operated in areas where you can see
the device to be controlled. Never switch devices where you have
no visual contact.
– COMPLIES WITH RADIO & TELECOMMUNICATION
TERMINAL EQUIPMENT DIRECTIVE (RTTE)
DANGER! The transmitter may not be used in connection with
devices that take care of physical health etc. and may not be
operated with devices which can be dangerous for humans,
animals or material assets.
To Next Page
Loading...