What to do if my HTW Dehumidifier doesn't work?
If your HTW Dehumidifier isn't working, check the following: * Ensure the power line is properly connected by checking the plug and socket. * If the full water indicator is lit, empty the water tank and ensure it's correctly placed. * Verify that the room temperature is between 5 and 35 degrees Celsius, as the protection device may activate outside this range.
Why won't my HTW Dehumidifier start dehumidifying?
If the dehumidification function on your HTW Dehumidifier won't start, it could be due to a blocked filter. Clean the filter screen according to the dehumidifier's cleaning instructions. Another possible cause is a blocked air inlet or outlet, so remove any obstructions.
Why is my HTW HTWD020A3 Dehumidifier so noisy?
If your HTW Dehumidifier is making excessive noise, ensure the machine is placed on a flat, strong surface to prevent tilting. Also, a blocked filter can cause noise; clean the filter screen according to the dehumidifier's cleaning instructions.
What to do if my HTW HTWD020A3 Dehumidifier shows E1 code?
If your HTW Dehumidifier displays an E1 code, it indicates a coil sensor short circuit or open circuit. Check if the line is loose, and if not, consider replacing the coil sensor.
Why is there no wind coming from my HTW HTWD020A3?
If there's no wind coming from your HTW Dehumidifier, the filter might be plugged. Clean the filter screen according to the cleaning instructions provided with the dehumidifier.
General| Brand | HTW |
|---|---|
| Model | HTWD020A3 |
| Category | Dehumidifier |
| Language | English |
To Next Page
