HTW IX39B3 User Manual


Page 10 
The SLEEP function is used to decrease
energy use while you sleep (and don’t need
the same temperature settings to stay
comfortable). This function can only be
Press the SLEEP button activated via remote
control. when you are ready to go to sleep.
When in COOL mode, the unit will increase
the temperature by 1°C (2°F) after 1 hour,
and will increase an additional 1°C (2°F) after
another hour. When in HEAT mode, the unit
will decrease the temperature by 1°C (2°F)
after 1 hour, and will decrease an additional
1°C (2°F) after another hour.
It will hold the new temperature for 7 hours,
then the unit will turn off automatically.
Note: The SLEEP function is not
available in FAN or DRY mode.
Sleep Operation
Set
temperature
1hr
1hr
7 hours
timer off˜
+/- 1ºC/ 2º F
SLEEP Operation
Fig. 3.1
•
+/- 1ºC/ 2º F
32

HTW IX39B3 Specifications

General

Brand	HTW
Model	IX39B3
Category	Air Conditioner
Language	English