To Next PageTo Next PageWhy is my HTW Air Conditioner's cooling efficiency not good?
If your HTW Air Conditioner isn't cooling well, check if the air inlet or outlet is blocked. Also, ensure there aren't any other heat or cool sources affecting the room. Verify that the indoor fan speed isn't set to LOW. The room might also be too hot or cold when the unit is started, affecting its efficiency.
How to troubleshoot an HTW Air Conditioner that won't turn on?
If your HTW Air Conditioner doesn't start, check for a power failure. Ensure the plug is properly inserted and that the power fuse or switch is on. Also, verify that the voltage is neither too high nor too low.
Why HTW W2 Air Conditioner does not operate for about 3 minutes when restart?
This is normal. Your HTW Air Conditioner might not operate for about 3 minutes after being restarted to protect its mechanism. Wait about three minutes, and it will begin operating again.
Why does my HTW Air Conditioner emit foggy air?
When operating in COOL mode, your HTW Air Conditioner may sometimes release foggy air. This happens because the humid air in the room is being cooled rapidly.
General| Brand | HTW |
|---|---|
| Model | W2 |
| Category | Air Conditioner |
| Language | English |
Critical safety warnings for handling refrigerant R32, including flammability and handling.
Notes on room area requirements for installation and operation with R32.
Essential safety instructions for operating the air conditioner to prevent hazards.
Important warnings and advice before proceeding with the air conditioner installation.
Step-by-step instructions and diagrams for the physical installation of the unit.
Guidelines for safe electrical connections, grounding, and circuit protection.
Mandatory requirements for earthing and circuit protection for safe operation.
Ensuring plug accessibility and avoiding use in laundry areas or with damaged cords.
Information and warnings regarding the flammable R32 refrigerant and installation area.
Diagnosing common problems like no operation, poor efficiency, and foggy air.
Critical situations where immediate contact with the dealer is necessary.
Qualifications required for personnel involved in installation and maintenance.
