HTW W2 User Manual

AUTO COOL DRY FAN HEAT
Introduction for buttons on remote controller
Note:
ditioner gives out a beep sound, it means the signal has been sent.
● When unit is off, set temperature will be displayed on the remote controller (If the
light of the unit display is turned on, the corresponding icon will be displayed);
When unit is on, it will display the icon of the on-going function.
● This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
● When power is connected (stand by condition), you can operate the air
conditioner
through the remote controller.
●
When unit is on, each time you press the button on remote controller, the sending
signal icon " "on the display of remote controller will blink once. If the air con-
1
HEALTH button
Press this button to trun on/OFF health function .
Note:This function is not available for this model.
2
SWING button
Press this button to turn on left & right air swing.
3
ON/OFF button
Press this button to turn unit on/off.
●
When selecting auto mode, air conditioner will operate automatically according to
ambient temperature. Set temperature can't be adjusted and won't be displayed
either. Press SPEED button to adjust fan speed.
● When selecting cool mode, air conditioner will operate under cool mode. Then press
+ or - button to adjust set temperature. Press SPEED button to adjust fan speed.
● When selecting dry mode, air conditioner will operate under dry mode. Then press
+ or - button to adjust set temperature. Press SPEED button to adjust fan speed.
● When selecting fan mode, air conditioner will operate in fan mode only. Then press
SPEED button to adjust fan speed.
● When selecting heat mode, air conditioner will operate under heat mode. Then
press + or - button to adjust set temperature. Press SPEED button to adjust fan speed.
(Cooling only unit can’t receive heating mode signal. )
4
MODE button
Pressing this button once can select your required mode circularly as below (the
corresponding icon " " will be lit up after the mode is selected):
42

HTW W2 Specifications

General

Brand	HTW
Model	W2
Category	Air Conditioner
Language	English