To Next PageTo Next Page
Need help?Do you have a question about the HTW IX80 and is the answer not in the manual?
General| Brand | HTW |
|---|---|
| Model | IX80 |
| Category | Air Conditioner |
| Language | English |
Safety guidelines for operating and maintaining the air conditioner.
Identification of components of the indoor unit and remote control.
Details the functions of each button on the remote control.
Explains the meaning of various icons displayed on the remote control screen.
Explains the operation of specific buttons like ON/OFF, MODE, FAN, SWING.
Describes functions achieved by pressing multiple buttons simultaneously.
Step-by-step instructions for basic air conditioner operation using the remote.
Instructions on how to replace batteries in the remote control.
How to operate the unit using the auxiliary button when the remote is lost or damaged.
Guidelines for cleaning the indoor unit's surface and filter.
Detailed steps for opening, removing, cleaning, and installing the air filter.
Checks to perform before and after the cooling/heating season.
Information on recycling packing materials and disposing of the unit.
Troubleshooting common issues based on observed phenomena like no remote action or no air.
Lists error codes and their corresponding troubleshooting steps.
Diagram showing required clearances for indoor unit installation.
List of tools needed for the installation process.
Guidelines for choosing optimal locations for indoor and outdoor units.
Essential safety measures for electrical connections during installation.
Importance and methods of proper grounding for electrical safety.
Recommending and confirming the installation site with the client.
Steps to properly hang and fix the wall-mounting frame.
Instructions on creating the hole for pipes, including dimensions and angles.
Guiding the pipe out from the indoor unit in different directions.
Steps for connecting pipes to the indoor unit, including tightening union nuts.
Wrapping pipes with insulation and connecting the drain hose.
Instructions for accessing the wiring compartment by removing the cover.
Connecting the power cable to the indoor unit's wiring terminal.
Bundling the connection pipe, power cord, and drain hose together.
Mounting the indoor unit onto the wall-mounting frame.
Checklist to ensure proper installation and identify potential malfunctions.
Steps for preparing and performing the unit's operational test.
Specifications for maximum connection pipe length and height difference based on cooling capacity.
Guidelines for adding refrigerant oil and refrigerant based on extended pipe lengths.
Instructions for cutting the pipe and removing burrs for proper expansion.
Using an expander to create the correct port shape and inspecting for quality.
