Introduction for buttons on remote controller
5
+ / - button
●
Pressing + or - button once will increase or decrease set temperature by 1°F(°
C). Hold + or - button for 2s, set temperature on remote controller will change
quickly.
Release the button after your required set temperature is reached.
6
SPEED button
Pressing this button can select fan speed circularly as: AUTO, SPEED 1 ( ),
SPEED 2 ( ) , SPEED 3 ( )
.
Note:
● Under Auto speed, air conditioner will select proper fan speed automatically acc-
ording to ambient temperature.
Under Cool, Heat ,Dry mode, press this button to turn on Sleep function. Press this
button to cancel Sleep function. Under Fan and Auto mode, this function is unavailable.
7
SLEEP button
Under Cool, Heat mode, press this button to turn on Turbo function. Press this button
to cancel Turbo function. Under Fan, Dry and Auto mode, this function is unavailable.
8
TURBO button
9
TIMER button
● When unit is on, press this button to set Timer Off. Press this button to adjust
the time for Timer Off. Pressing this button to adjust time by one hour to make
24 hours in cycle.when it reach 24 hours,press this button one more time to be
off the timer function.
Hold this button for 2s, set hours on remote controller will change quickly.
● When unit is off, press this button to set Timer On. Press this button to adjust
the time for Timer On. Pressing this button to adjust time by one hour to make
24 hours in cycle.when it reach 24 hours,press this button one more time to be
off the timer function.
Hold this button for 2s, set hours on remote controller will change quickly.
10
ECO
button
Under Cool, Heat mode, press this button to turn on energy saving function. Press
this button to cancel energy saving function. Under Fan, Dry and Auto mode, this
function is unavailable.
ECO function can not be used with Turbo at the same time.
To Next Page
Loading...
Need help?
General
