HTW W2 User Manual

Introduction for buttons on remote controller
Press this button to turn onself-cleaning technology .
Note:This function is not available for this model.
11
CLEAN button
12
I FEEL button
Press this button to turn on I FEEL function .
Note:This function is not available for this model.
13
DISPLAY button
To start or stop DISPLAY when air conditioner is in RUNNIG.
Remarks:
1. Temperature can be set between 16℃~32℃.
2. The function and display of Heat is not available for cooling-only air conditioner.
3.When there is something wrong with the remote controller, please press ‘RESET’ button and
then operate again.
4.HEAT、AUTO function and display are not available for cooling-only type air conditioner.
5.If user want tomake the room air cool or warm quickly ,user can press “turbo” button in cooling or
heating mode,air conditioner will run in power function.If press “turbo” button again, air conditioner
will exit power function.
6.The above illustration of remote controller is only for reference, it may be slightly different from
the actual product you selected.
44

HTW W2 Specifications

General

Brand	HTW
Model	W2
Category	Air Conditioner
Language	English