Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions
section of this manual.
ON/OFF: Turns the unit on or off.
MODE: Scrolls through operation modes as follows:
SWING:
Starts and stops the horizontal louver
movement. Hold down for 2 seconds to initiate
vertical louver auto swing feature(some units) .
AUTO COOL DRY
HEAT FAN
FAN SPEED: Selects fan speeds in the following order:
AUTO LOW
MED HIGH
TEMP : Decreases temperate in 1°C increments.
Min. temperature is 17°C.
TIMER ON: Sets timer to turn unit on (see How to
Use Basic Functions for instructions).
TIMER OFF: Sets timer to turn unit off (see How to Use
Basic Functions for instructions).
I SENSE: Temperature sensing and room temperature
display button.
NOTE:
Press together the two buttons simultaneously for
5 seconds to lock the keyboard. Press together the two
buttons for 2 seconds to unlock the keyboard.
SHORT CUT
I SENSE
Model: R51F/EF
Model: R51F4/E
Press together simultaneously
NOTE: Please do not select HEAT mode if the
machine you purchased is cooling only type. Heat
mode is not supported by the cooling only appliance.
1
3
5
7
9
11
1
TEMP : Increases temperate in 1°C increments.
Max. temperature is 30°C.
2
3
5
7
SLEEP: Saves energy during sleeping hours .
SHORT CUT: Sets and activates your favorite pre-settings
9
11
2
4
6
8
10
12
4
6
8
10
12
1
3
5
7
12
2
4
6
8
10
LED DISPLAY: Press this button to turn on and turn off
the display on the indoor unit.
To Next Page
Loading...
