Need help?Do you have a question about the Huato HE173 and is the answer not in the manual?
General| Measurement Parameters | Temperature, Humidity |
|---|---|
| Temperature Accuracy | ±0.5°C |
| Humidity Range | 0% to 100% RH |
| Humidity Accuracy | ±3% RH |
| Power Supply | 3.6V lithium battery |
| Communication Interface | USB |
| Protection Class | IP65 |
| Resolution (Temperature) | 0.1°C |
| Resolution (Humidity) | 0.1% RH |
| Logging Interval | 2 seconds to 24 hours |
| Battery Life | Approximately 1 year |
| Operating Conditions | 0% to 100% RH |
Key features including IP67 rating, low power, and high precision.
Step-by-step guide for installing the device's battery.
Procedures for installing the necessary drivers and the Logpro application.
Steps to connect the logger, configure, and start a new measurement.
Detailed explanation of each configuration setting within the software.
Explains 'Start Now', 'Delay Start', and 'Timing Start' for data recording.
Instructions for connecting and downloading data from the logger.
To Next Page
