Huawei ANE-LX1 User Manual

Dual card dual standby single
pass (applicable to dual cards)
Your device supports only dual card dual standby single pass,
which means you cannot use both SIM cards for calls or data
services simultaneously.
l When you are on a call using SIM card 1, SIM card 2 cannot
be used to make or answer calls. If someone calls SIM card
2, the caller will hear a voice message similar to "The
subscriber you dialed is out of the service area" or "The
subscriber you dialed cannot be connected for the moment,
please try again later." The actual message will vary by
service provider.
l When you are using SIM card 1's data service, SIM card 2's
data service will be disabled.
Your device's single pass feature helps reduce power
consumption and increase your device's standby time. It is not
related to your service provider's network conditions.
It may be a good idea to contact your service provider and
subscribe to missed call reminder and related assistance
services to avoid the conicts mentioned above.
3

Huawei ANE-LX1 Specifications

General

Model	ANE-LX1
Also known as	Huawei P20 Lite
Category	Cell Phone
Dimensions	148.6 x 71.2 x 7.4 mm
Weight	145 g
CPU	Octa-core (4x2.36 GHz Cortex-A53 & 4x1.7 GHz Cortex-A53)
GPU	Mali-T830 MP2
RAM	4 GB
Internal Storage	64 GB
Selfie Camera	16 MP, f/2.0
Battery	3000 mAh, non-removable
SIM	Hybrid Dual SIM (Nano-SIM, dual stand-by)
Colors	Klein Blue, Sakura Pink, Midnight Black
Network	GSM / HSPA / LTE
Bluetooth	4.2, A2DP, LE
USB	2.0, Type-C 1.0 reversible connector
Sensors	Fingerprint (rear-mounted), accelerometer, proximity, compass
Chipset	Kirin 659
Expandable Storage	microSDXC (uses shared SIM slot)
Main Camera	2 MP, depth sensor
Operating System	Android 8.0 (Oreo)