Need help?Do you have a question about the Huawei AP4030DN and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| Bandwidth | 5 GHz |
| Frequency band | 2.4, 5 GHz |
| Number of users | 256 user(s) |
| Operating modes | Access Point (AP) |
| Channels quantity | 13 channels |
| Number of VLAN IDs | 4094 |
| Transmitting power | 20 dBmW |
| Scheduling features | Airtime scheduling, Queue mapping & scheduling |
| Control channel mode | Tagged & untagged |
| Fit AP mode features | 802.11k & 802.11v smart roaming, AC dual-link backup, AC unified management & maintenance, Dual-MPP mesh networking, Mesh networking, Hotspot 2.0, Plug and Play, Service holding upon CAPWAP link disconnection, Unified authentication on the AC, WDS zero-configuration deployment, Wireless distribution system (WDS) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Rate adjustment type | Automatic & manual |
| Virtual LAN features | SSID-based VLAN assignment |
| Data unit aggregation | A-MPDU (Tx/Rx), A-MSDU (Rx only) |
| WLAN channel features | WLAN channel management, WLAN channel rate adjustment |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1167 Mbit/s |
| Location services supported | AeroScout tags, Ekahau tags, Wi-Fi terminals |
| Number of virtual APs (VAPs) | 16 |
| Wi-Fi Multimedia (WMM) features | WMM parameter management for each radio, WMM profile based packet scheduling, WMM profile based priority mapping, WMM power saving |
| Maximum data transfer rate (5 GHz) | 867 Mbit/s |
| AC input voltage | 12 V |
| Power consumption (max) | 10.2 W |
| Internal | No |
| Placement | Table |
| Product color | White |
| LED indicators | Status |
| International Protection (IP) code | IP41 |
| Flash memory | 32 MB |
| Internal memory | 256 MB |
| Security algorithms | 802.1x RADIUS, WAPI, WEP, WPA, WPA2, WPA2-PSK |
| Device type identification | DHCP options, Organizationally Unique Identifier (OUI), User Agent (UA) |
| Service Set Identifier (SSID) features | Hidden SSID |
| WAN connection | Ethernet (RJ-45) |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 2 |
| Operating altitude | -60 - 5000 m |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Local AP management | Serial port, Telnet |
| Antenna features | Integrated antenna |
| Antenna gain level (max) | 6 dBi |
Weight and Dimensions| Width | 180 mm |
|---|---|
| Height | 39.5 mm |
| Weight | 400 g |
Describes the physical structure and appearance of the AP4030DN.
Explains the different indicator lights on the AP and their states.
Presents detailed technical, power, and environmental specifications of the AP4030DN.
Lists the RoHS and REACH compliance information for the product.
Covers safety precautions and tool preparations required before installing the AP.
Instructions for safely unpacking the AP and verifying the packing list.
Rules for choosing the best location, considering obstacles and interference.
Step-by-step guide for mounting the AP on a wall.
Steps to attach the AP to a ceiling tile or bracket.
Guide for installing the AP using a T-rail mounting system.
Explains how to connect Ethernet and power cables to the AP.
Guidance on how to power on the AP and check its status.
Step-by-step guide to connect and log in to the AP via a console cable.
Instructions for logging into the AP using the STelnet protocol.
Guide to access and configure the AP through its web interface.
Details FCC rules on interference, compliance, and radiation exposure.
To Next Page
