Need help?Do you have a question about the Huawei AP4050DN-E and is the answer not in the manual?
General| Model | AP4050DN-E |
|---|---|
| Type | Wireless Access Point |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Wireless Standards | 802.11a/b/g/n/ac |
| Maximum Data Rate | Up to 1.267 Gbps |
| MIMO | 2x2 MIMO |
| Antenna | Built-in antennas |
| Operating Temperature | -10°C to +50°C |
| PoE | 802.3af/802.3at |
Provides general information about the document's purpose, audience, and conventions.
Specifies the target audience and required experience for understanding the manual.
Explains the meaning of various symbols used throughout the document.
Details the physical components and layout of the AP4050DN-E.
Explains the function and status of the device's indicator lights.
Lists key technical parameters like dimensions, weight, memory, and power.
Provides part numbers and descriptions for ordering the AP and related items.
Covers essential safety precautions and required tools for AP installation.
Visualizes the step-by-step process for installing the AP.
Provides instructions on how to safely unpack the AP and check package contents.
Guides on selecting the optimal location for AP mounting based on site survey.
Details the procedure for installing IoT cards into the AP's expansion slots.
General instructions for mounting the AP device.
Explains how to connect various cables (network, power, RF) to the AP.
Lists essential checks to perform after the AP has been installed.
Describes the procedure for powering up the AP and verifying its status.
Guides on accessing the device CLI for configuration via STelnet/Telnet.
Explains how to access the device GUI via a web browser for management.
Details accessing the device via the console port for management.
Troubleshooting steps for when the device does not power on.
Provides detailed procedures for assembling various types of cables and connectors.
Outlines necessary environmental conditions for optimal device performance and longevity.
Details the requirements for proper grounding of devices and equipment rooms.
Explains how to create and apply labels for identifying cables and connections.
Provides guidance on the installation, use, and troubleshooting of optical modules.
A comprehensive checklist to verify all installation steps and requirements are met.
Instructions on creating drip loops for water protection on cables.
Lists compatible DC, AC, and PoE power adapters for different device models.
To Next Page
