Huawei AP4050DN-E - 1.2 Indicator Description

No. Name Description
5 GE0/PoE_IN 10/100/1000M port: connects to the wired Ethernet and
supports PoE input.
6 DC 12V Connects a 12 V power adapter to the AP.
7 Security slot Connects to a security lock.
8 Radio port Connects an antenna to an IoT card through a radio cable.
NOTE
l The AP supports the following power supply modes: PoE power supply and DC power supply.
l When the AP uses the DC power supply, use a power adapter for power supply; otherwise, the AP
may be damaged.
l For power adapter models, see 5.9 Power Adaptation Solution.
1.2 Indicator Description
The AP4050DN-E provides only a single indicator, as shown in Figure 1-2.
NOTE
Indicator colors may vary slightly at different temperature.
Figure 1-2 Indicator
Indicator
Table 1-2 Description about the single indicator
Type
Color Status Description
Default
status
after
power-on
Green Steady on The AP is just powered on and the software is not
started yet.
AP4050DN-E
Hardware Installation and Maintenance Guide
1 Product Overview
Issue 05 (2018-02-02) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3