Huawei AP6510DN-AGN User Manual

AP6610DN-AGN
7
Device Introduction
No.
Name
Description
1
ETH port
(ETH/PoE port)
Connected to a switch or PD.
2
Default
Press and hold down the Reset button for 3 seconds to restore the
factory settings and restart the AP.
3
SFP port
Connected to fiber. An optical module is required.
4
AC power port
Connected to an AC power module.
5
2.4 GHz
antenna port
A port connected to the 2.4 GHz antenna.
6
5 GHz
antenna port
A port connected to the 5 GHz antenna.
7
Ground screw
Connect the ground cable to the AP with a ground screw.
Table 3 Interfaces on outdoor APs
Table 4 Interfaces on outdoor APs
1
2
5 5 6 6
3
4 7

Huawei AP6510DN-AGN Specifications

General

Brand	Huawei
Model	AP6510DN-AGN
Category	Wireless Access Point
Language	English