5
Install four floating nuts on front mounting rails, two on each side. Install the floating nuts in two
mounting holes with one hole between them.
Hold bottom of the router and push the router into the cabinet.
Use M6 screws to secure the router onto the cabinet/rack.
Connect the ground cable to the ground point.
Step 2
Step 3
Step 4
Step 5
Attach mounting brackets to the router with M4 screws. Determine the mounting method
according to the brackets delivered with your router.
Step 1
Installation Procedure
Applicable to AR650 series (excluding AR651F-Lite
/AR651C)
Applicable to AR1610-X6
Applicable to AR651F-Lite/AR651C
Applicable to AR6120 series
Distance between mounting rails:
507 mm-566 mm
Distance between mounting rails:
375 mm-454 mm
Applicable to AR6140-9G-2AC/AR6140-S
/AR6140-16G4XG
Applicable to AR6280 Applicable to AR6300/AR6300-S
To Next Page
Loading...
