Huawei AR1200 Series - Page 66

Number Indicator Color Description
5 and 6 SFP interface
indicators:
l The LINK
indicator is in
green.
l The ACT
indicator is in
yellow.
Green
If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
Yellow If the indicator is blinking, data is being
transmitted or received.
If the indicator is off, no data is being
transmitted or received.
7 and 8 GE interface
indicators:
l The LINK
indicator is in
green.
l The ACT
indicator is in
yellow.
Green
If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
Yellow If the indicator is blinking, data is being
transmitted or received.
If the indicator is off, no data is being
transmitted or received.
9 MiniUSB EN Green If the indicator is steady on, the port is
used as a MiniUSB port.
If the indicator is off, the port does not
function as a MiniUSB port.
10 CON/AUX EN
NOTE
l Either the
CON/AUX
port or the
MiniUSB
port can be
used at a
time.
l By default,
the port is
used as the
CON/AUX
port. The EN
indicator is
green no
matter
whether a
cable is
installed.
Green
If the indicator is steady on, the port is
used as a CON/AUX port.
If the indicator is off, the port does not
function as a CON/AUX port.
11 RST
CAUTION
The Reset button is used for resetting cards manually. Resetting a
card will cause service interruption; therefore, carefully verify the
issue before you reset a card.
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
59