Huawei AR1200 Series - 1 E1 T1-M;2 E1 T1-M-1;2 Port-Channelized E1;T1;PRI;VE1 Multifunctional Interface Card

Interface Attributes
Table 5-28 Attributes of 10BASE-TX/100BASE-TX electrical interfaces
Item Description
Connector type RJ45
Interface attribute MDI/MDIX
NOTE
l The interfaces of most network cards are medium dependent interfaces
(MDIs).
l MDIX interfaces are usually used on hubs or LAN switches.
Standards
compliance
IEEE802.3, IEEE802.3u, IEEE802.3ab
Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP
Network layer
protocol
IP
Technical Specifications
Table 5-29 describes the technical specifications of the 2FE.
Table 5-29 Technical specifications of the 2FE
Item
Specification
Dimensions
(depth x width x
height)
223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.)
Maximum power
consumption
3.01 W
Weight 0.3 kg (0.66 lb)
5.5.3 1E1T1-M/2E1T1-M-1/2 Port-Channelized E1/T1/PRI/VE1
Multifunctional Interface Card
The 1E1T1-M/2E1T1-M is the E1/T1/PRI/VE1 processing unit on the AR routers and provides
one or two E1/T1/PRI/VE1 interfaces. Primary Rate Interface (PRI) indicates ISDN primary
rate interfaces.
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
76