Table 5-26 Buttons and indicators on the 2FE panel
Number in
Figure 5-11
Indicator Color Description
1 STAT Green If the indicator blinks once 2s (0.5
Hz), the system is running properly.
If the indicator blinks once 0.25s (4
Hz), the system is powering on or
restarting.
Red If the indicator is red, a fault that
affects services occurs and cannot be
rectified automatically. The fault
needs to be rectified manually.
Off If the indicator is off, the software is
not running or is being reset.
2 and 3 FE interface
indicators:
l The LINK
indicator is
in green.
l The ACT
indicator is
in yellow.
Green
If the indicator is steady on, a link
has been established.
If the indicator is off, no link is
established.
Yellow If the indicator is blinking, data is
being transmitted or received.
If the indicator is off, no data is being
transmitted or received.
Interfaces
Table 5-27 describes the types and functions of interfaces on the 2FE.
Table 5-27 Types and functions of interfaces on the 2FE
Letter
in
Figure
5-11
Name Qua
ntit
y
Description Cable Type
a FE electrical
interface
2 The 2FE provides two FE
electrical interfaces to transmit
and receive FE services.
6.5 Network
Cable
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
75
To Next Page
Loading...
