AR 3200 Series Compliance and Safety Manual
3 Safety Information
Issue (2009-08-24) Huawei Technologies Proprietary 3-15
l
Bundle the signal cables separately from the strong current cables or high voltage cables.
l
Maintain a minimum space of 150 mm between adjacent ties.
3.8.3 Cabling Requirements
At a very low temperature, movement of the cable may damage the plastic skin of the cable.
To ensure the construction safety, comply with the following requirements:
l
When installing cables, ensure that the environment temperature is above 0°C.
l
If cables are stored in the place below 0°C, move the cables into a place at a room
temperature and store the cables for more than 24 hours before installation.
l
Move the cables with care, especially at a low temperature. Do not drop the cables
directly from the vehicle.
To Previous Page
Loading...
