Huawei AR200 series - Page 65

[Huawei] interface ethernet 0/0/6
[Huawei-Ethernet0/0/6] poe priority critical
Step 4 Verify the configuration.
# Display the PoE power supply status of the LPU in slot 0.
<Huawei> display poe power-state slot 0
PortName PowerOn/Off Enabled Priority Status
--------------------------------------------------------------------------------
Ethernet0/0/4 On Enable Low Delivering-
power
Ethernet0/0/5 On Enable Low Delivering-
power
Ethernet0/0/6 On Enable Critical Delivering-
power
Ethernet0/0/7 On Enable Low Delivering-power
----End
Configuration Files
#
poe max-power 100000 slot 0
#
interface Ethernet0/0/6
poe priority critical
#
interface Ethernet0/0/7
poe power 20
#
return
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 3 PoE Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
56