Huawei AR502 Series - Installing the Router on a Desk

3
Install the SIM card cover back to the router and tighten
the screw to fix the cover.
3
1
2
3
NOTE
For an AR502CG-L, skip this step because it does not need rubber pads.
Scenario 1: Installing the Router on a Desk
Ensure that the desk is flat and properly grounded.
Leave at least 50 mm of clearance around the router for heat dissipation.
Do not place other objects on the router.
CAUTION
Attach four rubber pads in the imprinted round areas marked plus (+) signs at the bottom of the router.
1
Gently place the router on the desk.
2