23
The Specific Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency energy
absorbed by the body when using a device. The SAR
value is determined at the highest certified power level in
laboratory conditions, but the actual SAR level during
operation can be well below the value. This is because
the device is designed to use the minimum power
required to reach the network.
The SAR limit adopted by India is 1.6 watts/kilogram
(W/kg) averaged over one gram of tissue. The highest
SAR value for this device is
1.030 W/kg.
Legal Notice
Copyright © Huawei Technologies Co., Ltd.
2015. All rights reserved.
No part of this manual may be reproduced or transmitted
in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd. and its
affiliates ("Huawei").
The product described in this manual may include
copyrighted software of Huawei and possible licensors.
Customers shall not in any manner reproduce, distribute,
modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software,
unless such restrictions are prohibited by applicable laws
or such actions are approved by respective copyright
holders.
To Next Page
Loading...
