Huawei B593s-22 User Manual (English)

To Next Page

Procedure

1. You should start by inserting the SIM card and then plug the power adapter to the B593 4G

router. The SIM card must be inserted on the right side when looking at the front of the

router. You can see the SIM card slot in the LTE CPE B593. The power plug must be inserted

behind the router.

2. Now you need to connect the router to your computer via the wireless network (WiFi). You

will find the router’s name and network code on the sticker behind the router.

WLAN – Name (SSID) is the router’s name and WLAN – Key (WPA/WPA2) is the router’s

wireless network password. When you first connect the router via WiFi, it would be necessary to

enter the WLAN key and get connected.

If you experience problems connecting to the router with the information on the back of the

router, this information may be changed. Press reset on the side of the router with a ball pen for

about 20 seconds and try again.

3. Once connected, open your Internet browser (e.g. Internet Explorer, Chrome or Safari) and in

the address bar type the routers address http://192.168.1.1 (or Homerouter.cpe). It’s the device

website on the label.

The default language is English, but you can choose your preferred language. The username

is admin and the password is admin (lowercase). You can also find both the router’s address

and password on the sticker behind the router.

4. The router will ask you to change the password when you login. You can ignore it. Your

router is already secured with the unique network code that you entered earlier in order to

connect to the router.

5. Now select Setup Wizard on the left menu.

You must validate your PIN to the SIM card. You will find PIN 1 on the frame (where you took

the SIM card out of the scrape area). Then click Validate. Tick Enable next to Save my

PIN and press Next.

Please note that the router stores the PIN code for the SIM card. Put one new SIM card in the

router at a time; enter the PIN code for the new SIM card in the same way.

But if you use the unlocked B593 Router, it’s unnecessary to do this. 4GLTEMALL.com is

selling the unlocked B593 Router.

6. You do not need to change anything in the next section called Internet.

Other manuals for Huawei B593s-22

Need help?

Do you have a question about the Huawei B593s-22 and is the answer not in the manual?

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
USB version	2.0
Rack mounting	-
Frequency range	2.4 - 2.4835 GHz
USB ports quantity	1
4G standard	LTE
2G standards	EDGE, GPRS, GSM
3G standards	HSDPA, HSPA+, HSUPA
UMTS bands supported	800, 900, 2100, 2600 MHz
Security algorithms	WEP, WPA-PSK, WPA2-PSK
Flash memory	512 MB
AC input voltage	100 - 240 V
Power consumption (typical)	12 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %